Erosion wear of glass fibre reinforced vinyl ester
Keywords:
erosion wear, fibre reinforced polymer, glass fibre, slurry-pot, vinyl ester compositeAbstract
This study evaluates the slurry-erosion wear of glass fibre reinforced vinyl ester composites (VE-FRP) using a high speed slurry-pot type wear tester. The wear rates of VE-FRP were compared using different abrasives, namely quartz, chromite, copper ore, zinc concentrate, and tailings. Furthermore, the effect of abrasive particle size and slurry concentration on the VE-FRP wear was studied. The erosion wear results of VE-FRP were compared to natural rubber (NR) and bromobutyl rubber (BIIR) as well as to few common thermoplastics, such as polypropylene (PP) and polyvinyl chloride (PVC). Moreover, the failure characteristics of VE-FRP were analyzed. The results demonstrated that coarse quartz produced the largest wear rates on VE-FRP samples, while the zinc concentrate showed the lowest wear. Minor changes in the abrasive particle size had no effect on the wear results, only when the particle size was markedly raised, the wear started to increase. When comparing the wear rates of different materials, it was concluded that with all abrasive types, tested rubbers and thermoplastics had lower wear rates than VE-FRP.
